5804 BDV

Professional Burglar Alarm Systems

Ademco Security Products On-Line Store

Vista 20PI Installation Guide

Vista 20PI User Guide PDF

Alarm System Monitoring

Vista 20P Features

• Eight on-board hardwire zones standard (15 when Zone Doubling feature is used)

• Expandable to 48 total zones when used with hardwired and/or wireless expansion modules

• Wireless keys can be programmed without using zones

• 16 output devices
  – Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
  – X-10® devices (when used with a 4300 Transformer)

• Two low current on-board trigger outputs

• 100 Event Log viewable at system keypads with time/date stamp

• 48 system user codes assignable to either partition

• Two independent partitions plus a common partition
  – Global Arming from any system keypad
  – Goto function to view or operate one partition from the other
  – Separate partition account numbers

• Multiple actions on output devices depending on system "state"
  – Turns lights off when system arms
  – Turns the same light on when system disarms
  – Flashes same lights when system is in alarm

• Supports four-wire, and up to 16 two-wire smokes
  – Works with Sentrol CleanMe™ maintenance signal

Valuable End User Features

• Now viewable on system keypads:
  – Exit countdown
  – Time and date display*
  – Event log*

• Auto keypad backlighting on entry

• Keyswitch arming

• Programmable macro buttons and single-button arming

• User Scheduling
  – Automatically activates X-10 and relays at programmed times
  – Latchkey reports to pagers
  – Auto arm/disarm
  – "User access" time windows

• *Requires custom alpha keypad

 Electrical

• Seven hour standby at 400mA aux. load with four amp hour battery

• 16.5VAC/25VA transformer

• Alarm output 12VDC, 2.0 amps maximum

Output Control

• Supports up to four relay boards (up to 16 relays)

• Optional X-10 transformer/interface (part no. 4300) may be used to control up to 16 X-10 receiving devices

Zones

• Eight hardwired zones (15 with zone doubling)

• Assignable to any partition

• 20 selectable zone types plus four configurable zone types

Expansion Devices

• 4219 – Eight hardwired zones – 16mA

• 4204 – Up to four relays – 15mA standby (each active relay draws an additional 40mA)

• 4229 – Eight hardwired zones and two relays – 36mA (each active relay draws an additional 40mA)

Accessories

• 4286 VIP Voice Module – 220mA

• 5881ENL RF Receiver supports up to eight zones – 60mA,
  5881ENM supports up to 16 zones – 50mA,
  5881ENH up to 40 zones – 50mA

• 5883 Transceiver supports up to 40 zones – 80mA

• Supports Eagle 1225 and 1221 boards

Smoke Detectors

• Supports up to 16 two-wire smoke detectors

• Supports four-wire smoke detectors