|
Ademco 998PI Pet PIR Motion
Detector
The new 998PI enhances the industry's
leading PIR by offering pet immunity up to 40 lbs.
By design, the 998PI offers the same
level of versatility-reliability and ease of installation that made the 998 the industry's
motion sensor of choice.
35' x 45' (10.6m x 13.7m) coverage pattern
Immune to pets up to 40 pounds
Split-Zone Optics technology
EZ-Mount™ features for fast-trouble
free installation
Split-Zone Optics splits
each zone into two stacked sub-zones. Each sub-zone is the same size as the original, but
only has about half the sensitivity. To generate an alarm, a target must intercept both
sub-zones simultaneously. A human target is sufficiently large enough while pets up to 40
lbs remain undetected. |
 |
 |
Specifications:
Detection Method
Passive infrared
Coverage
Pet Immune Lens
35' x 45' (10.6m x 13.7m), 90°
Detection Zones
Pet Immune Lens - 30 zones (8 long range, 7 over 7 intermediate, 4 over 4 short range)
Pulse Count
Intermediate or Standard selectable via DIP switch
NOTE: Use standard for pet immune applications
Detectable Walk Rate
0.5-10ft/sec (0.15-3m/sec)
Mount Height
7.5' (2.3m), nominal
Indicators
Red LED with enabled/disabled via DIP switch
Alarm Relay
Form A, SPST, 90mA@16VDC 15-ohm protective resistor
Input Voltage
10 - 16VDC
(Voltage reversal makes PIR inoperative)
Current
18 mA (non-alarm), nominal
16 mA (alarm), nominal
Standby
Power source should be capable of at least 4 hours of battery standby
Operating Temp
14ºF - 122ºF (-10ºC to +50ºC)
Operating Humidity
Up to 95% RH (max.), non-condensing
Dimensions
2.625" W x 4.375" H x 1.125" D
(67mm x 111mm x 54mm)
STANDARD LENS
|
