|
New Page 1
Model 6062 programmable
timer is suitable for many functions that require a timed operation e.g. Access
Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour
Supervisory Timer, etc. Some optional functions include: One Shot, Delayed
Release, Delayed Operate, Delayed Pulse and Pulser/Flasher. A new feature has
been added which provides a momentary relay activation at the end of a desired
timing cycle. This feature eliminates the need for having to use two (2) timers
to achieve this function. Another new feature will cancel (interrupt) timing
cycle and reset timer if desired.
Installation Instructions
• 12VDC or 24VDC selectable operation.
• Quick and extremely accurate time range adjustment
 from
1 sec. to 60 min.
• LED indicates relay is energized.
• Form "C" relay contacts are 8 AMP at 120VAC/28VDC.
• Current Draw: Stand-by 3mA, Relay Energized 40mA.
• Triggers via positive DC (+) voltage, dry contact closure,
or
removal of contact closure.
• Selectable relay activation at the start or end of the timing cycle.
• One (1) second momentary relay activation at the end of the timing cycle
(eliminates
the need to use two (2) timers for this function).
• Built-in reset feature which cancels timing cycle.
• Repeat (pulser/flasher) mode.
• Snap Trac compatible (order Altronix model#
ST3)
• DIN Rail Mount version available (order Altronix model#
DTMR1).
•
Lifetime Warranty.
• Dimensions (approximate): 3"L x 2.5"W x .75"H.
|
